Schedule a Guided Tour Request a Call back

Home > Services > HVAC Maintenance > Refrigerant Assessment

Refrigerant Level Assessment services
Refrigerant Assessment

HVAC Refrigerant
Level Assessment
Stop Compressor Failure Before It Starts

Refrigerant pressure check to identify undercharge or leak conditions. Low refrigerant is the leading cause of compressor failure — the most expensive HVAC repair in a rental property.

What’s Included on Every Job
Suction and discharge pressure measured
Subcooling and superheat calculated
Leak indication flagged and documented
EPA Section 608 certified technicians
Submit a Work Order
Why It Matters

The Real Challenges Behind
Refrigerant Level Assessment

Property owners and managers deal with these issues daily. Breasy is built specifically to handle each one without friction, follow-up, or guesswork.

No Documentation, No Defense
01

No Documentation, No Defense

Without timestamped before-and-after photos on every job, property managers have no documentation to support security deposit deductions or owner reporting.

Vendor Delays Cost Vacancy Revenue
02

Vendor Delays Cost Vacancy Revenue

Finding, vetting, and scheduling a reliable vendor takes time most property managers don’t have. Each day of delay is vacancy revenue lost.

Inconsistent Work Without Defined Scope
03

Inconsistent Work Without Defined Scope

Generalist vendors produce inconsistent results. Breasy maintains a defined scope and quality standard on every job, regardless of property size.

“

If you’re considering Breasy, I would absolutely recommend giving them a try. Being able to hand off a work order and trust that everything will be professionally managed from start to finish has made a meaningful difference in our day-to-day workload.

KL
Kara Ludwig
Senior Property Manager, Real Estate Brokers of Arizona
★★★★★
Refrigerant Level Assessment Services

Everything Included in
Breasy Refrigerant Level Assessment

Every work order is scoped before work begins. Here’s exactly what we cover — no scope creep, no surprise add-ons.

1

Refrigerant Level Assessment

Refrigerant pressure check to identify undercharge or leak conditions. Low refrigerant is the leading cause of compressor failure — the most expensive HVAC repair in a rental property.

Suction and discharge pressure measuredSubcooling and superheat calculatedLeak indication flagged and documented
Request Refrigerant Level Assessment
Refrigerant Level Assessment
Who Uses This Service

Built for Everyone Responsible
for a Property

From portfolio managers with 500 doors to individual homeowners — the process, pricing standard, and documentation are the same.

Property Managers

Submit work orders from AppFolio, Buildium, or email. Quotes in 48 hours, completion photos same day, single point of contact across your entire portfolio.

Learn more →

Real Estate Investors

No on-site staff. No time to manage vendors. Submit the work order, approve the quote, receive photos proving completion — across your entire portfolio.

Learn more →

Homeowners

You don’t need a portfolio to use Breasy. Individual homeowners submit work orders the same way — market-rate pricing, before-and-after photos, invoice on completion.

Learn more →

Institutional SFR Companies

Enterprise-level volume with the same documentation standards. Breasy scales across large single-family rental portfolios without adding headcount or vendor complexity.

Learn more →
How It Works

Simple Process.
Consistent Results.

Four steps from work order to invoice. No vendor juggling, no follow-up calls.

Submit a Work Order
Step 1

Submit a Work Order

Use the Breasy platform, your property management software, or email. Describe the job. We handle the rest.

Step 2

Review Your Quote

You receive an itemized quote within 48 hours. No work starts until you approve it in writing.

Review Your Quote
We Complete the Work
Step 3

We Complete the Work

Our dispatched professionals arrive on schedule. All work is documented with timestamped photos before and after.

Step 4

Receive Documentation

Job completion photos and itemized invoice delivered the same day. Everything stored in your work order history.

Receive Documentation
Breasy Standard
Our Commitment

Why Property Owners Keep Coming Back

Every Refrigerant Level Assessment job comes with the same documentation, pricing transparency, and completion standard. No exceptions for portfolio size or property type.

Itemized quote before any work starts — no surprise invoices
Before-and-after photos delivered same day as job completion
Single point of contact across all properties and work orders
Work order history and invoices accessible any time
Why Breasy

Breasy vs. Your Other Options

See how Breasy compares to managing vendors yourself or using a generalist marketplace.

Breasy
★★★★★4.9
DIY Vendors
★★★Variable
Gig Platforms
★★★3.4
Quote turnaround Within 48 hours 1–5 business days Varies widely
Completion photos ✓ Same-day delivery Rarely provided Inconsistent
Portfolio work orders ✓ Unlimited concurrent Vendor capacity limited Single-job only
Invoice documentation ✓ Itemized Manual process Basic receipts
Get a Quote
The Details

What Actually Drives Refrigerant Assessment Cost and Timeline

Cost Drivers

Refrigerant type is the single biggest cost variable: systems still running R-22 are working with a refrigerant that’s been phased out of production, so any recharge on an R-22 system costs significantly more per pound than the same service on a modern R-410A system. What the assessment finds changes the scope dramatically — a simple low-charge top-off is quick, but discovering an active leak means locating and repairing the leak point before any recharge makes sense, since recharging a leaking system just delays the same problem. System accessibility matters operationally — a rooftop or attic-mounted unit takes longer to assess and service than a ground-level condenser. And system size sets the baseline time: a larger-tonnage system holds more refrigerant and takes longer to charge back to the manufacturer’s exact specification than a smaller unit.

Common Failure Scenarios

A slow leak at a line connection is the most common scenario, and it rarely announces itself — cooling performance degrades gradually over a season rather than failing outright, which is why it often goes undiagnosed until someone notices the system just isn’t keeping up anymore. Overcharging or undercharging from a previous service visit is a quieter failure — a system charged even slightly off spec can short-cycle or ice up at the evaporator coil, and that looks like a coil problem when the real issue is the charge level. Coil icing itself is frequently a combination issue: low refrigerant charge plus a dirty coil together cause icing that a coil cleaning alone won’t permanently fix if the charge is also off. And for R-22 systems specifically, finding a leak raises the stakes — the economics often shift toward system replacement rather than an expensive recharge on a refrigerant that’s being phased out entirely.

How This Work Differs by Market

In the desert markets of Phoenix, Tucson, and Las Vegas, near-constant summer AC runtime means a slow refrigerant leak gets noticed faster simply because the system runs so many more hours, but it also means a borderline-low charge shows symptoms sooner under that heavier load. In the humid Texas, Florida, and Georgia markets, low refrigerant charge compounds with ambient humidity, so the more common complaint is poor dehumidification — the space feels damp and sticky — rather than simply “not cold enough.” In Denver and Seattle, heat pump systems run both heating and cooling modes, so a proper refrigerant assessment checks charge level in both modes since a charge issue can present differently depending on which one is active. And older housing stock in Seattle and parts of Denver is more likely to still be running an R-22 system, which raises the financial stakes considerably if an assessment turns up a leak.

Common Questions

Frequently Asked Questions

Breasy service FAQ

How long does refrigerant level assessment take?

+
Most refrigerant level assessment jobs are completed within 1 to 3 business days depending on unit size and scope. Breasy provides a specific timeline in the itemized quote before work begins.

Do I need to be present during the job?

+
No. You submit the work order, approve the quote remotely, and receive completion photos delivered the same day. Access coordination is handled through your work order.

Is this service available for single units or only large portfolios?

+
Breasy handles both. Individual homeowners submit refrigerant level assessment work orders through the same platform as portfolio managers with hundreds of units.

What’s included in the quote?

+
Every quote is itemized — materials, labor, and any haul-away or disposal fees are broken out separately. There are no surprise line items on the invoice.

Can I bundle this with other services?

+
Yes. You can submit a single work order covering multiple services and Breasy coordinates the sequencing and scheduling.

How do I know if my AC problem is low refrigerant vs. something else?

+
Low refrigerant usually shows up as gradually worsening cooling or ice forming on the indoor coil or lines, rather than the system failing to turn on at all. Poor dehumidification — the space feeling damp even when it’s cool — is another common sign, especially in humid markets. A proper assessment measures the actual charge level rather than guessing from symptoms alone.

What’s different about assessing an R-22 system vs. a newer one?

+
The assessment process is the same, but the stakes are different. R-22 has been phased out of production, so if the assessment finds a leak, recharging an R-22 system costs considerably more per pound than a modern R-410A system, and it’s often worth discussing replacement economics at that point rather than repeatedly recharging an aging system.

If there’s a leak, does Breasy just recharge it or fix the leak too?

+
Recharging a system with an active, unrepaired leak just delays the same problem since the refrigerant will leak out again. Breasy’s assessment locates the leak point first, and the quote covers the leak repair and recharge together rather than a top-off that won’t hold.
What Clients Say

Trusted by Property Owners
Across the Country

From single-family homeowners to institutional portfolio managers — here’s what they say about working with Breasy.

★★★★★

“Working with Breasy has been a game-changer for our properties. Their team is reliable, professional, and consistently goes above and beyond. It’s a relief to have a partner we can trust. We highly recommend Breasy.”

JD
John Domo
GPS Renting
★★★★★

“We are a property management company that handles a large number of properties. Not only do they provide a fast response to our requests, but they also deliver excellent customer service. We highly recommend this company if you’re looking for great service at a fair cost.”

MG
Mariana Gomez
Bahia Property Management
★★★★★

“They’re amazing. Quick and efficient. Great job!”

AB
Alejandro Bianchi
Homecare Specialist, Phoenix, AZ
Service Coverage

Markets Where Breasy
Delivers Refrigerant Level Assessment

Currently serving these metros with the same process, documentation, and pricing standards.

Refrigerant Level Assessment
You Can Actually Count On.

Most property managers who work with Breasy start with one job. Within a few months, we’re handling the majority of their portfolio — not because we asked for more work, but because the first job got done right, on time, with photos to prove it.

LET US HANDLE YOUR PROPERTY MAINTENANCE

Getting Started is Easy-peasy.

Book a time with our team →

Headquarters:

For Property Managers

Schedule a Guided Tour

Request a Call Back

Email for Work Orders:

maintenance (at) joinbreasy.com