Tree Removal Cost Calculator: Get Your Instant 2026 Estimate

Tree removal costs between $150 and $2,500, depending on height, trunk diameter, location, and accessibility. A 30-foot oak in an open backyard runs around $400-$700, while the same tree near power lines or a fence can hit $1,200 or more. Use the calculator below to get a baseline estimate.

Across 100K+ completed jobs, we’ve found accessibility creates the biggest pricing gap most calculators miss entirely. Phoenix side-yard removals average 40% higher than open-lot trees of the same size because sectional work replaces simple felling.

A note on coverage: This calculator reflects pricing in our 12 current markets across 7 states. Outside these areas? Use these figures as a baseline, then ask local providers about accessibility factors, disposal fees, and whether stump grinding is included.

Calculate Your Tree Removal Cost #

Our tree removal cost calculator factors in the variables that actually drive pricing: height, trunk diameter (DBH measurement), accessibility, and tree condition. Input your tree’s specs to get an instant estimate based on current market rates across our service areas.

Most online calculators ignore accessibility, which produces wildly inaccurate estimates. A tree in an open lot with a clear drop zone costs significantly less than one wedged between a garage and a power line—the difference between felling (dropping the whole tree) and sectional removal (climbing arborist work) can double the price.

After you calculate your estimate, submit the work order through Breasy. Breasy returns a market-rate quote within 48 hours of submission.

How to Use the Tree Removal Cost Calculator #

Getting an accurate estimate requires two measurements and one assessment. Here’s how to do it properly.

Measuring Tree Height and Trunk Diameter #

For height: Stand at the base of the tree and walk away until you can see the top. Use your phone’s measurement app or the shadow method (measure your shadow, then the tree’s shadow, and calculate the ratio). Most people overestimate tree height by 20–30%. That 40-foot tree you’re looking at is probably 30 feet.

For trunk diameter: Measure circumference at chest height (about 4.5 feet up), then divide by 3.14. A trunk that measures 38 inches around has a 12-inch DBH.

If you can’t measure precisely, estimate conservatively. Height-based pricing jumps at standard thresholds (25 feet, 50 feet, 75 feet), so knowing which category your tree falls into matters more than exact measurements.

Assessing Accessibility #

Walk around the tree and answer these questions:

• Can a truck or trailer park within 50 feet?
• Is there a clear path to drag debris out?
• What’s directly below the tree canopy?
• Are there power lines within 20 feet?
• Could the tree be dropped in one piece, or would it hit something?

If the answer to any of these creates a constraint, expect your quote to land in the higher end of the calculator’s range.

How Much Does Tree Removal Cost in 2026? #

Tree removal pricing breaks down by size and species, but accessibility and condition create the real swing in final cost. Based on our 12-market job data, the patterns are consistent once you understand the variables.

Average Tree Removal Costs by Size #

Height drives the base price because taller trees require more equipment, more time, and often sectional removal instead of simple felling. Our data shows 25-50ft trees average $620 in Phoenix compared to $840 in Denver, reflecting regional labor rates and disposal costs.

Tree Height	Average Cost Range	Typical Removal Method
Under 25 feet	$150–$450	Felling or basic climbing
25–50 feet	$450–$900	Climbing arborist, sectional
50–75 feet	$900–$1,500	Bucket truck or advanced rigging
Over 75 feet	$1,500–$2,500+	Crane-assisted or complex sectional

Trunk diameter matters too. A tree under 10 inches DBH (diameter at breast height) is straightforward. Once you hit 20+ inches, the ground crew needs heavier equipment for processing and hauling.

Tree Removal Costs by Species #

Species affects both removal difficulty and disposal weight. Hardwoods like oak and maple cost more because the wood is denser, takes longer to cut, and weighs more to haul.

Species	Cost Factor	Notes
Pine/Conifer	Lower	Soft wood, faster cutting
Palm	Moderate	Height-dependent, lighter debris
Oak	Higher	Dense wood, heavy limbs
Eucalyptus	Higher	Unpredictable splitting, messy
Diseased/Dead Tree	Variable	May be easier to cut but less stable

Key Factors That Affect Tree Removal Cost #

Your calculator estimate is a starting point. These factors determine where your actual quote lands within that range.

Tree Height and Trunk Diameter #

Height determines equipment needs. Under 25 feet, most removals use basic climbing gear and hand tools. Once you’re over 50 feet, bucket trucks or crane assistance becomes necessary in many situations.

Trunk diameter affects processing time. A 6-inch DBH tree gets cut and loaded quickly. A 30-inch DBH oak requires multiple cuts, heavier machinery, and more labor hours. We measure DBH at 4.5 feet above ground, which is standard across the industry.

Location and Accessibility #

Accessibility factors that increase cost:

• No truck access to the tree (everything must be carried out)
• Tight drop zone requiring controlled lowering
• Obstacles like sheds, pools, or landscaping below
• Slope or uneven terrain affecting equipment stability

In our Phoenix and Las Vegas markets, we regularly see trees in tight side yards with block wall fencing on both sides. That’s sectional work every time.

A recent Bahia Property Management job required crane access for a 60ft eucalyptus in a constrained backyard, adding $400 over the initial estimate. Bahia’s feedback: “fast response and excellent customer service” despite the complexity.

Tree Condition and Health #

A healthy tree is predictable. You know where it will fall, how the limbs will react, and what equipment you need.

A diseased or hazardous tree changes everything. Fungal decay weakens internal structure. Storm damage creates hanging limbs called “widowmakers”—compromised limbs that can fall without warning.

For dead trees, the structure is unpredictable even when the wood appears dry: limbs break unexpectedly and crew risk increases, which means dead tree removal often costs the same or more than removing a healthy tree of equivalent size.

We follow specific rigging protocols for all compromised trees: our climbing arborists secure each compromised section before cutting rather than relying on standard felling techniques.

Fallen tree removal after a storm is a different job entirely. The tree is already down, but it’s tangled in structures, fences, or other trees. Extraction becomes the challenge rather than controlled felling.

Proximity to Power Lines and Structures #

Any tree within 10 feet of power lines requires coordination with the utility company and often specialized techniques. The utility may need to de-energize lines when lines are active, which adds scheduling complexity and cost.

Trees near structures require precision. A tree trimming job that removes hazardous limbs near a roof is different from clearing an open-lot tree. Every cut must be controlled, and when clearance is under 5 feet, limbs are lowered with ropes rather than dropped.

Regional Pricing Differences #

Tree removal pricing varies by market. In Texas markets like DFW and Houston, lower disposal dump fees keep costs closer to the base range. Denver pushes the 25-50ft average to $840 due to higher labor rates and species-specific disposal requirements.

Seattle’s wet climate adds moss, rot, and unpredictable wood conditions that affect crew time. We operate across 12 markets in 7 states, so your quote reflects actual market-rate pricing for your specific location—not a national average.

Additional Tree Removal Services and Costs #

Tree cutting cost is just one piece. Most jobs include additional services that you should plan for.

Stump Grinding and Removal #

Tree removal typically leaves a stump at ground level. Stump grinding costs an additional $75–$300 per stump, depending on diameter and root system.

Most property managers opt for stump grinding rather than full stump removal. Grinding takes the stump down 6–12 inches below grade and mulches it in place. Full extraction digs out the entire root ball, which costs more and leaves a larger hole to fill.

For rental properties, stump grinding is usually sufficient unless you’re planning new landscaping or construction in that spot.

Debris Hauling and Cleanup #

Some quotes include debris hauling, and others charge it separately. Always confirm before approving.

Full cleanup means all branches, trunk sections, and leaves are removed from the property. Some services offer to leave the wood for firewood, which can reduce your cost slightly.

We include debris hauling and cleanup in our tree removal pricing. Same-day completion photos show the cleared site before any invoice goes out.

Emergency Tree Removal #

Storm damage doesn’t wait for business hours. Emergency tree removal for fallen trees or hazardous situations runs 25–50% higher than standard removal due to urgency and after-hours work.

If you’re managing properties in storm-prone markets, having a tree service relationship established before you need it saves time and money. When a tree falls on a rental property on Saturday night, you need someone who answers.

From Estimate to Completion: What to Expect #

Once you approve the quote, here’s how the job proceeds:

• Scheduling confirmation within 24 hours of approval
• Pre-job site assessment to confirm access and equipment needs
• Tree removal execution using the appropriate method (felling, sectional, or crane-assisted)
• Debris hauling and site cleanup completed on the same day
• Completion photos uploaded before invoicing

Most tree removals are completed within our standard 5-day window. Complex jobs or utility coordination may extend the timeline, and we communicate that upfront in the quote.

Documentation and Completion Photos #

Every completed job includes photo documentation of the cleared site. Breasy delivers photo documentation that closes HOA loops without requiring your site visit. If the tree removal is addressing an HOA compliance issue, we provide the documentation you need to respond to the violation notice—resolved and in hand within 48 hours of job completion across our markets.

Tree Removal for Property Managers #

Managing one tree is straightforward. Managing landscaping and tree issues across a portfolio is where things break down.

We work with portfolio property managers across Phoenix, DFW, Denver, Seattle, and our other markets. The pattern is consistent: tree issues stack up because chasing quotes for each property takes more time than you have.

A hazardous tree at one property. Dead tree removal is needed at two others. Tree pruning before storm season at ten more locations. Each one requires a separate estimate, separate scheduling, and separate follow-up. Or you submit them all through one work order—we handle the quotes, scheduling, and execution for every property. One submission triggers the entire workflow.

When you submit a tree removal job through Breasy, we own it from quote to documented completion. Whereas a marketplace connects you to rotating contractors with no single point of accountability, Breasy executes the work and handles any adjustments internally— so you never see the operational complexity behind the scenes.

Tree Removal Cost FAQ #